計器組立 計器組立
What 計器組立 do
An English description is being prepared. Japanese description:
計器の種類は多種多様であり、はかり、温度計、気圧計、ガスメーター、水道メーターなどがある。
計器組立は、熟練を要する組立・調整の作業といえる。多くの計器は多種少量生産であるため、コンベアーによる流れ組立は少なく、計器のうちの一定部分ごとにいくつかのユニットを決めて一人一人がその決められたユニットの組立を行う場合が多い。これら組立てられたユニットを更に総合組立工程に移し、組立、調整し製品にまとめる。そして最終検査をして出荷する。
各組立工程では、金属・合成樹脂・電子材料などでつくられた精密な部品を正確に組み立てるため、個人的な技能差が出ないようにそれぞれの工程で治具(じぐ)を用いて部品が所定どおりセットできるようにし、ドライバーでのネジ締め、ボルト締め、カシメ、接着、はんだ付けなどの作業を行う。これらの組立作業は、通常、各組立ごとに（個人ごとに）工程図に基づいて行われる。
◇ よく使う道具、機材、情報技術等
治具、ドライバー、はんだごて、ピンセット
Employment type of workers
計器組立 salary
The average annual pay for 計器組立 in Japan is ¥4.58M (≈ $29,094; Basic Survey on Wage Structure (2025), national). The estimated median is ¥4.25M, the typical range is ¥3.23M–¥7.61M and the top 10% earn about ¥6.60M.
How does your pay compare with people your age?
Your numbers are not sent or stored. The distribution is estimated from Japan's national wage statistics, including pay differences by age.
Pay by ageest.
Estimated from the average pay and average age (43.3) using the age-wage curve of the Basic Survey on Wage Structure.
Pay by experienceest.
Pay by employment typeest.
The average hourly wage of ¥2,191 is 1.9× Japan's national average minimum wage of ¥1,177 (fiscal 2026). Minimum wage by prefecture →
Japanese pay is shown in yen (¥5.57M = 5.57 million yen ≈ 557万円). Dollar figures use the current rate of 157.25 yen per dollar and are for reference only; purchasing power differs.
Pay over time
| Year | Average pay | Employment | Openings ratio |
|---|---|---|---|
| 2021 | ¥4.03M | — | — |
| 2022 | ¥4.37M | — | — |
| 2023 | ¥4.42M | — | 0.75x |
| 2024 | ¥4.46M | — | 0.68x |
| 2025 | ¥4.58M | — | 0.72x |
Projected pay for 計器組立 (3, 5 and 10 years)est.
Today ¥4.58M → in 3 years ¥4.82M → in 5 years ¥4.99M → in 10 years ¥5.44M (10-year range ¥4.68M–¥6.31M). The model assumes pay growth of +1.7% per year.
What drives the annual growth rate
Projected pay = current pay × (1 + annual growth)^years. The annual growth rate starts from a base wage-growth rate and adds or subtracts labor demand (the job-openings-to-applicants ratio), wage momentum and AI replacement risk for each occupation. Projections are not guarantees. How it is calculated →
Outlook score for 計器組立
Each component is a percentile rank among all occupations in the same country (0–100). Weights: labor demand 25, wage momentum / openings 15, pay level 15, AI resistance 25, aging workforce 10 (Japan only), entry barrier 10.
Will AI replace 計器組立? AI replacement risk
How AI is changing this job
A written analysis for this occupation is being prepared.
AI replacement risk compares the parts of a job that are easy to hand to AI or software (processing information, documentation, repetitive computer work) with the parts that are hard to automate (physical work, working closely with people, judgment in unpredictable settings), using the MHLW job tag survey on work activities, work context, skills and knowledge. The result is a relative position among all occupations in the country, scaled to 0–100%. Methodology →
Labor demand for 計器組立
A ratio above 1.0 means there are more job openings than applicants (a labor shortage). The 5- and 10-year figures are estimates from the openings ratio, wage momentum and AI replacement risk.
The same job in the United States
| 計器組立 Japan | Electromechanical Equipment Assemblers United States | |
|---|---|---|
| Median / average pay | ¥4.58M ≈ $29,094 | — |
| Pay in 10 years (est.) | ¥5.44M | — |
| Outlook score | 32 | 42 |
| AI replacement risk | 53% Moderate | 51% Moderate |
| Workers | — | — |
Matched by occupation (SOC code). Yen converted at 157.25 JPY/USD for reference; Japanese figures are averages, U.S. figures are medians, and the surveys define occupations differently.
Skills, education and requirements for 計器組立
Key skills
Skill levels from the MHLW job tag worker survey.
Key knowledge areas
What the work involves
Important abilities
Licenses and certifications (Japan)
No specific license or certification is required.
Education of workers
Training before entry
Related work experience
Difficulty of entry: ★★☆☆☆ Fairly easy (from education, training, experience, licenses)
How to become 計器組立
The typical path in Japan is shown by the education, training and experience of current workers above and in the Japanese guidance below. A detailed English guide for this occupation is being prepared.
Guidance from job tag (Japanese)
工業系の高校、機械・電気系の専門学校等を卒業し計器メーカーに入職するのが一般的である。他の職業からの中途採用もある。
新規学卒者は、学校、ハローワークの紹介がほとんどである。中途採用は、ハローワーク、新聞、求人広告等で行われている。
入職直後は、簡単なユニット組立作業を行い、仕事に慣れ経験を積み重ねるに従い複雑なユニット組立作業へ、更には総合組立作業へと進む。これらの組立作業の経験を経て、次の工程である「調整・検査工程」では、組み立てられた製品が所定の値にあるかを基準器と比較して確かめ、必要に応じ微調整を行う。これらの作業は、組立作業の経験がないとうまくできない。経験を積んで現場の責任者等になる場合もある。
機械や電気についての初歩的な知識があれば作業の習得、上達に役に立つ。細かい部品をピンセットやドライバーなどを使って取り扱うために手先の器用さや、視力がよいことも求められる。また、座って長い時間、同じ姿勢で作業を続けられる集中力や根気強さも重要である。
Career path and how to earn more as 計器組立
Career-path guidance is being prepared. Pay by experience is shown in the Pay section.