医療用画像機器組立 医療用画像機器組立
What 医療用画像機器組立 do
An English description is being prepared. Japanese description:
具体的には、部品組立、部分組立、ユニット組立、総合組立、試験・調整、検査、据付作業、アフターサービスなどを行う。
Ｘ線装置の場合は、数多くのユニットや部品から構成されており、工程は多岐にわたる。
主要ユニットである高圧発生器は鉄心とコイル及び整流器からなる。鉄心は硅素鋼板を巻きつけて接着し、それを機械加工したものに１次コイルと２次コイル及び整流器を組み立てて鉄製容器に収め、絶縁油を充填して完成させる。制御器は高圧発生器に電源を供給するもので、計器類やスイッチ、切替機、タイマーなどを組み立てて配線する。作業には各種治工具を使用する。
Ｘ線管装置の組立作業では、構成部分である陰極、陽極、陽極回転機構、ガラス管などを組み立ててシールし、排気する。このＸ線管を容器に収め絶縁油を充填した後、高電圧を加えて安定動作の確認を行う。
透視撮影台の組立作業は、重量物組立であるためクレーン操作や玉掛けの技能が必要になる。
Ｘ線ＴＶカメラの組立は、ニッパやペンチ、ドライバー、はんだごてなどを用いて精密な組立と配線を行い、その後に試験をする。
ユニットの組立が完成すると、最後に各構成ユニットを組み合わせる総合組立及び総合試験調整を行って、製品を完成させる。
◇ よく使う道具、機材、情報技術等
治工具、クレーン、ニッパ、ペンチ、ドライバー、はんだごて
Employment type of workers
医療用画像機器組立 salary
The average annual pay for 医療用画像機器組立 in Japan is ¥4.46M (≈ $28,368; Basic Survey on Wage Structure (2025), national). The estimated median is ¥4.15M, the typical range is ¥3.16M–¥7.39M and the top 10% earn about ¥6.41M.
How does your pay compare with people your age?
Your numbers are not sent or stored. The distribution is estimated from Japan's national wage statistics, including pay differences by age.
Pay by ageest.
Estimated from the average pay and average age (44.1) using the age-wage curve of the Basic Survey on Wage Structure.
Pay by experienceest.
Pay by employment typeest.
The average hourly wage of ¥2,161 is 1.8× Japan's national average minimum wage of ¥1,177 (fiscal 2026). Minimum wage by prefecture →
Japanese pay is shown in yen (¥5.57M = 5.57 million yen ≈ 557万円). Dollar figures use the current rate of 157.25 yen per dollar and are for reference only; purchasing power differs.
Pay over time
| Year | Average pay | Employment | Openings ratio |
|---|---|---|---|
| 2021 | ¥4.09M | — | — |
| 2022 | ¥4.13M | — | — |
| 2023 | ¥4.14M | — | 0.75x |
| 2024 | ¥4.29M | — | 0.68x |
| 2025 | ¥4.46M | — | 0.72x |
Projected pay for 医療用画像機器組立 (3, 5 and 10 years)est.
Today ¥4.46M → in 3 years ¥4.72M → in 5 years ¥4.90M → in 10 years ¥5.38M (10-year range ¥4.62M–¥6.24M). The model assumes pay growth of +1.9% per year.
What drives the annual growth rate
Projected pay = current pay × (1 + annual growth)^years. The annual growth rate starts from a base wage-growth rate and adds or subtracts labor demand (the job-openings-to-applicants ratio), wage momentum and AI replacement risk for each occupation. Projections are not guarantees. How it is calculated →
Outlook score for 医療用画像機器組立
Each component is a percentile rank among all occupations in the same country (0–100). Weights: labor demand 25, wage momentum / openings 15, pay level 15, AI resistance 25, aging workforce 10 (Japan only), entry barrier 10.
Will AI replace 医療用画像機器組立? AI replacement risk
How AI is changing this job
A written analysis for this occupation is being prepared.
AI replacement risk compares the parts of a job that are easy to hand to AI or software (processing information, documentation, repetitive computer work) with the parts that are hard to automate (physical work, working closely with people, judgment in unpredictable settings), using the MHLW job tag survey on work activities, work context, skills and knowledge. The result is a relative position among all occupations in the country, scaled to 0–100%. Methodology →
Labor demand for 医療用画像機器組立
A ratio above 1.0 means there are more job openings than applicants (a labor shortage). The 5- and 10-year figures are estimates from the openings ratio, wage momentum and AI replacement risk.
The same job in the United States
| 医療用画像機器組立 Japan | Electromechanical Equipment Assemblers United States | |
|---|---|---|
| Median / average pay | ¥4.46M ≈ $28,368 | — |
| Pay in 10 years (est.) | ¥5.38M | — |
| Outlook score | 37 | 42 |
| AI replacement risk | 43% Moderate | 51% Moderate |
| Workers | — | — |
Matched by occupation (SOC code). Yen converted at 157.25 JPY/USD for reference; Japanese figures are averages, U.S. figures are medians, and the surveys define occupations differently.
Skills, education and requirements for 医療用画像機器組立
Key knowledge areas
What the work involves
Important abilities
Licenses and certifications (Japan)
- 第1種放射線取扱主任者
- 第2種放射線取扱主任者
- エックス線作業主任者
Related qualifications listed on job tag (names in Japanese). Some are mandatory, others recommended.
Education of workers
Training before entry
Related work experience
Difficulty of entry: ★★☆☆☆ Fairly easy (from education, training, experience, licenses)
How to become 医療用画像機器組立
The typical path in Japan is shown by the education, training and experience of current workers above and in the Japanese guidance below. A detailed English guide for this occupation is being prepared.
Guidance from job tag (Japanese)
医療機器の中でも放射線を取り扱う職場では、国家資格の「エックス線作業主任者」や「第２種放射線取扱主任者」が必要となるが、入職後に社内教育を経て受験機会を得るのが一般的である。これらの資格を取得すると、医療現場での据付けやメンテナンスの分野での仕事も可能となる。
入職後に職場ごとに研修等が行われるが、医療機器には超音波装置のような携帯・移動型機器から磁気共鳴画像診断装置や粒子線治療装置のような大型機器に至るまで多様な機種があり、組立作業も簡単な作業から高度な技能・技術を要するものまで幅広くある。工学系の基礎知識の他、各種の医療機器に関連する規格（国際、日本、業界）の知識も必要となる。
Career path and how to earn more as 医療用画像機器組立
Career-path guidance is being prepared. Pay by experience is shown in the Pay section.